Specifications:
Model |
B2002FR-8I-CM-RF-QR-BTK-L06 |
|
Hardware |
|
|
Processor |
Dual Core Processor + 1G memory + 16G flash |
|
Operating system |
Linux Operating system |
|
Viewing angle |
Vertical viewing angle: 30°; Horizontal viewing angle: 30° |
|
Sensor |
1/2.8" Progressive Scan CMOS |
|
Lens |
6mm |
|
Card swiping module |
13. 56MHz, support Mifare S50, S70 card, ultralinght card, NTAG card, DESFire D21, D41, D81, non-contact CPU card |
|
QR code Scanning module (optional) |
640 (horizontal) X 480 (vertical) CMOS, horizontal viewing angle 31°, support QR code, PDF417, EAN13, EAN8, UPC-A and other one-dimensional codes, two-dimensional codes |
|
Speaker |
voice playback content can be customized |
|
Temperature measurement performance |
Please find the notes on last page |
|
Measurement range |
16℃ - 40℃ (Indoor without wind) |
|
Temperature measurement Lens |
European original lens |
|
Sensors type |
Medical-grade European imported sensors |
|
Measurement accuracy |
±0.3℃ |
|
Temperature resolution |
0.1℃ |
|
Temperature measurement distance |
≤30cm |
|
Measurement response time |
300ms |
|
Performance |
|
|
Recognition height |
1.2~2.2 meters, angle adjustable |
|
Recognition distance |
0.2~1.5 meters, depends on lens |
|
Recognition angle |
Vertical viewing angle: 30°; Horizontal viewing angle: 30° |
|
Recognition time |
Less than 0.2 seconds |
|
Storage capacity |
160,000 capture records |
|
Face capacity |
24,000pcs |
|
Screen luminance |
≥400cd/m2 |
|
Interface |
|
|
Switching output |
1 way switch output, other GPIO port can be customized |
|
Network interface |
1 RJ45 10M / 100M adaptive Ethernet port, Gigabit Ethernet port can be customized |
|
Wiegand interface |
1ch Wiegand interface input/output |
|
Communicate interface |
1ch RS485 interface |
|
USB interface |
1ch USB 2.0 interface |
|
Camera |
|
|
Camera |
Dual cameras |
|
Effective pixels |
2MP, 1920*1080 |
|
Min Illumination |
Color 0.01Lux @F1.2(ICR);B/W 0.001Lux @F1.2 (ICR) |
|
SNR |
≥50db(AGC OFF) |
|
WDR |
120db |
|
Video coding |
H.265 Main Profile/ H.264 BP/MP/HP /MJPEG |
|
Resolution |
Main stream |
50Hz: 25fps (1920×1080,1280×720) |
60Hz: 30fps (1920×1080,1280×720) |
||
Sub stream |
720*576,1-25(30)fps/640*480,1-25(30)fps 320*240,1-25(30)fps |
|
Function |
|
|
Web side configuration |
Support |
|
Remote upgrade |
Support |
|
Deployment |
Support LAN, WAN |
|
Regular |
|
|
Operating temperature |
-30℃ - +60℃ |
|
Working humidity |
0~90% relative humidity, no condensation |
|
Salt spray |
Level Rp6 or above |
|
Antistatic |
Contact ±6KV, air ±8KV |
|
Power |
DC12V/2A |
|
Waterproof |
IP42 |
|
Power |
20W(MAX) |
|
Screen size |
8 inches IPS HD screen |
Notes:
1. The temperature measuring device should be used in a room with no ventilation and room temperature between 16 ℃ -40 ℃.
2. The temperature measurement accuracy will affect if people entering indoors from a cold outdoor environment.
3. Please run the device 10 minutes after the sensor temperature and ambient temperature are balanced to start testing.
4. Please make sure that there is no heating source or air conditioning vent within 3 meters of the device.
5. Please taking temperature after leaving the forehead unobstructed for three minutes indoors when the temperature is stable.
6. Please do not exposure forehead under the situation such as showers, hair dryers, sprays, etc. It will affect the measurement.
7. The forehead temperature will be lower than the actual temperature if there is oil on the forehead, makeup, oxygen mask, or wrinkles in the elderly.
8. Please make sure there is no hair or clothing covering the area where the projection is located.